AmetekHaydonKerk AmetekAMS

DCM4826E

Haydon Kerk Stepper Motor Drive DCM4826E
The Haydon Kerk DCM4826 IDEA Stepper Motor Drive is ideal for controlling both rotary stepper motors and stepper motor based linear actuator systems using a simple “pulse”, “direction”, and “enable” signal from a stepper motor control board. Input voltage to the drive is 12-48 VDC. The stepper motor drive can provide a load current of 2.6A rms per phase. The PDE signals are optically isolated from the rest of the drive, providing the ability to reference a separate electrical ground.


Features :
  • RS-485 Communication protocol
  • Selectable step modes – Full, ½, ¼, 1/8, 1/16, 1/32, 1/64
  • Simple PDE interface for parameter setting
  • Maximum current ratings of 2.6 Arms
  • Compact Size: 2.36 in x 2.52 in x 1.35in (60 mm x 64 mm x 34.4 mm)
  • Specifications +


    Part Number DCM4826E
    Drive Input Voltage Range
    12 to 48 VDC
    Maximum Drive Current/Phase
    2.6 A rms
    Step Modes Full, Half, 1/4, 1/8, 1/16, 1/32, 1/64
    Communications RS-485
    Digital Inputs Voltage Range  0 to 24 VDC
    Digital Input Max Current 35 mA (each)
    Digital Input Minimum Pulse Width 5 µs
    Max. Pulse Input Frequency 100Khz (0-5V square wave)
    Maximum Temperature 70°C measured at heat sink
    Size 64 x 60 x 34.4 mm

  • Dimensional Drawings +


    DCM4826 Stepper Motor Drive
  • Connection Diagrams +


    I/O Connector  TABLE "A"
    PIN # DESCRIPTION
    1 OPTO GROUND
    2 ENABLE
    3 DIRECTION
    4 PULSE
    5 GROUND
    6 +5 TO 24 VDC 
    Communication Connector TABLE "B"
    PIN # DESCRIPTION
    1 Y / NON-INVERTING DRIVER OUTPUT
    2 Z / INVERTING DRIVER OUTPUT
    3 GROUND
    4 GROUND
    5 A / NON-INVERTING RECEIVER INPUT
    6 B / INVERTING RECEIVER INPUT
  • Downloads +


    Interface Software
    Drive Manuals