BGS04 High load ball guide

BGS04 Ball Guided Rail System
The motorized BGS04 Linear Rail is available with either size 11 or size 17 hybrid stepper motors with recommended horizontal loads up to 100 N (20 lbs). Size 17 stepper motors are also available with the integrated IDEA Drive. Rails can also be customized in stroke length, motor type, step angle, operating voltage and encoder. Contact an Applications Engineer for any technical support needed.
  • Dimensional Drawings +


    BGS04 A B C D E F G H
    (inch) (1.40) (1.00) (0.50) (0.75) (0.69) (0.60) (1.00) (0.75)
    mm 35.6 25.4 2.7 19.1 17.6 15.2 25.4 19.1
    BGS04 I J K L Z1 Z2 Z3 0
    (inch) (*) (1.22) (0.87) (0.75) (0.11) (0.20) (0.09) 0
    mm * 30.9 22.1 19.1 2.8 5.1 2.3 0

    Motorized BGS04 with Size 11 Double Stack Hybrid Stepper Motor

    Recommended for load support up to 22 lbs (100 N)

    Dimension “I” is a function of required travel distance



    Motorized BGS04 with Size 17 Hybrid Stepper Motor
    Recommended for load support up to 22 lbs (100 N)

    Dimension “I” is a function of required travel distance
  • Lubrication +


    Kerk BGS Linear Guides have Black Ice® TFE on all critical surfaces.

    At the heart of the BGS Linear Rail system is a Haydon® hybrid linear actuator with a precision 303 stainless steel lead-screw. The lead screw drives a machined aluminum carriage mounted to a precision stainless steel ball slide resulting in a rigid, smooth operating motion system. The screw is coated with Black Ice® TFE coating providing a permanent wearresistant dry lubrication.

    303 Stainless Steel lead-screws and guide rails are corrosion resistant, non-magnetic, and compatible with many demanding processes. Black Ice® TFE s a maintenance free, hard coating that offers exceptional durability in all types of environments, with virtually any type of polymer nut. Black Ice TFE coating remains on the screw, offering a low friction surface upon which the nut travels. Rather than acting as a dry lubricant, Black Ice TFE is an anti-friction coating whose surface properties displace the metal to which it is applied. Though it is not intended for use with metal or glass fiber reinforced nuts, Black Ice TFE is bonded securely to the screw’s surface and can withstand abrasion from contamination, rigid polymer systems, fluid impingement and wash down applications. Black Ice TFE can be used in the presence of more aggressive environment conditions, or anywhere reduced friction and a permanent coating is desired.
  • Integrated Drives +


    Motorized BGS04 Linear Rail with 43000 Series Size 17 Motor and IDEA Drive

    The BGS04 and BGS06 motorized rails are available with an integrated IDEA Drive when selecting the 43000 Series Size 17 bipolar motor.
    • Fully programmable
    • USB or RS-485 Communication
    • Microstepping Capability - Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64
    • Graphic User Interface
    • Auto-population of Drive Parameters
    • Programmable Acceleration / Deceleration and Current Control
    • Available with standard motorized leads
    • Available in 2.33 Vdc windings. Contact Haydon Kerk for higher voltage windings
    • RoHS compliant
    • RGS04 is recommended for load support up to 63 N (15 Lbs)

    For general IDEA Drive Features and Specifications click here.

    Dimensional Drawing:

    **Values Truncated
  • Customize +


    Haydon Kerk can custom-design and manufacture unique motorized BGS linear rails solutions to your equipment requirements. Special motor attributes, rail lengths, multiple carriages, alternate lead screws, lubrication, encoders and integrated drives are just some of the typical adaptations engineered to customer needs. Every Haydon Kerk linear rail product is supported by an experienced technical team recognized for innovation, customization, and dedicated customer service.
  • Part Number Guide +



    EXAMPLE:

    BGS06B-M0100-XXX = BGS™ for 135 lb (600 N) load, lead-screw with Black Ice® TFE coating, motorized with Size 17 stepper motor, 0.1-in (2.54 mm) lead-screw lead with no added features.
    Order number must include dashes ( – ) in sequence as shown above.