AmetekHaydonKerk AmetekAMS

WGS06

WGS06 Motorized Linear Rail
The Motorized WGS06 Linear Rail is available with either size 17 or size 23 hybrid stepper motor developing forces up to 156 N (35 lbs). Size 17 stepper motors are also available with the integrated IDEA Drive. Contact an Applications Engineer for any technical support needed.
  • Specifications +


    Lead Lead Code Design Load Screw Inertia
    Rail Series Motor Series in. (mm) lbs. (kg) oz. in.sec.2/in. (Kgm2/m)
    WGS06K - M0100 - XXX E43H4 .100 (2.54) 100 35 (156) 1.5 x 10-5   (4.2 X 10-6)
    E43M4
    E57H4
    E57M4
    WGS06K - M0200 - XXX E43H4 .200 (5.08) 200 35 (156) 1.5 x 10-5   (4.2 X 10-6)
    E43M4
    E57H4
    E57M4
    WGS06K - M0500 - XXX E43H4 .500 (12.70) 500 35 (156) 1.5 x 10-5   (4.2 X 10-6)
    E43M4
    E57H4
    E57M4
    WGS06K - M1000 - XXX E43H4 1.000 (25.40) 1000 35 (156) 1.5 x 10-5   (4.2 X 10-6)
    E43M4
    E57H4
    E57M4

    Size 17: 43 mm (1.7 in) Motor 1.8 degree
    Series
    E43H4-V E43M4-V
    Stack Length
    Single Double
    Wiring Units Bipolar Bipolar
    Step Angle degree 1.8° 1.8°
    Winding voltage VDC 2.33 5 12  2.33 5 12
    Current/Phase A rms 1.5 0.7 0.29 2.6 1.3 0.55
    Resistance/Phase ohms (Ω) 1.56 7.2 41.5 0.9 3.8 21.9
    Inductance/Phase mH 1.9 8.7 54 1.33 8.21 45.1
    Power Input Watts 7 10.4
    Motor Rotor Inertia gcm2 37 78
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

    Size 23: 57 mm (2.3 in) Motor 1.8 degree
    Series
    E57H4-V E57M4-V
    Stack Length
    Single Double
    Wiring Units Bipolar Bipolar
    Step Angle degree 1.8° 1.8°
    Winding voltage VDC 3.25 5 12 3.25 5 12
    Current/Phase A rms 2 1.3 0.54 3.85 2.5 1.0
    Resistance/Phase ohms (Ω) 1.63 3.85 22.2  0.98 2.0 12
    Inductance/Phase mH 3.5 10.5 58 2.3 7.6 35
    Power Input Watts 13 25
    Motor Rotor Inertia gcm2 166 332
    Standard motors are Class B rated for a maximum temperature of 130°C (155°C for Class F)

    WGS Performance

    WGS Linear Rail Performance

  • Dimensional Drawings +


    Motorized WGS06 with Size 17 Hybrid Motor
    Recommended for horizontal loads up to 156 N (35 lbs)




    Motorized WGS06 with Size 23 Hybrid Motor
    Recommended for horizontal loads up to 156 N (35 lbs)

  • Lubrication +


    Kerk WGS Linear Guides have Kerkote® TFE on all critical surfaces. The WGS utilizes sliding plane bearings on a low profile aluminum guide rail that keeps the motion smooth throughout the travel distance. The lead-screw is precision-made of high-quality stainless steel. All moving surfaces include Kerkite® high performance polymers running on Kerkote® TFE coating.

    Kerkote TFE is a soft coating, a long-term dry lubricant that is optimized for softer plastics like acetyls and nylons, with or without mechanical reinforcement. Lubrication to the nut / lead screw interface occurs by the nut picking up Kerkote TFE particles from the coating as well as from the migration of the internal lubricant within the plastic nut. The lubricant, although solid, also has some “spreading” ability as in fluid lubricants. Kerkote TFE coated screws provide the maximum level of self-lubrication and should not be additionally lubricated or used in environments where oils or other lubricant contamination is possible.
  • Integrated Drives +


    Motorized WGS06 Linear Rail with 43000 Series Size 17 Motor and IDEA Drive

    The WGS06 motorized rails are available with an integrated IDEA Drive when selecting the 43000 Series Size 17 bipolar motor.
    • Fully programmable
    • USB or RS-485 Communication
    • Microstepping Capability - Full, 1/2, 1/4, 1/8, 1/16, 1/32, 1/64
    • Graphic User Interface
    • Auto-population of Drive Parameters
    • Programmable Acceleration / Deceleration and Current Control
    • Available with standard motorized leads
    • Available in 2.33 Vdc windings. Contact Haydon Kerk for higher voltage windings
    • RoHS compliant

    For general IDEA Drive Features and Specifications click here.

    Dimensional Drawing:

    **Values Truncated
  • Customize +


    Haydon Kerk can custom-design and manufacture unique motorized RGS linear rails solutions to your equipment requirements. Special motor attributes, rail lengths, multiple carriages, alternate lead screws, lubrication, encoders and integrated drives are just some of the typical adaptations engineered to customer needs. Every Haydon Kerk linear rail product is supported by an experienced technical team recognized for innovation, customization, and dedicated customer service.
  • Part Number Guide +